FSLiving センサー 感知機能 人感センサー ブラケットライト 充電式 バッテリー内蔵式照明 ウォールランプ 配線不要 電球付属 角度調節可 壁掛け照明 LEDライト 壁に穴開け不要 賃貸対応 ベッドサイドライト 電気工事不要 ブラケットライト 壁掛けフックにて固定 電池式照明　賃貸照明 コードレス照明 ホワイト

• Easy to install, just hang it on the wall! The lamp is rechargeable, and after 3 hours of charging, it can be used for about 24 hours. It can also be used during a power outage. As an emergency light.
• Equipped with a motion sensor function. Saves energy.
• "Center function" detection method: Passive infrared. Lighting range: Within 3-5M. Lighting angle: 120 degrees. Turning off: Automatically turns off 35 seconds after people leave. If it detects again, it will turn on for another 35 seconds.
• Lighting mode: 2 modes . You can also switch between sensor function and constant lighting. [Sensor]: Select mode I with the switch [Constant lighting]: Select mode II with the switch
• Bulb included. Bulb specifications: LED 4w (equivalent to 40W) Output DC 3.7V Bulb color (Note: This is a low voltage bulb exclusively for this lamp. It cannot be used with ordinary lighting fixtures.)

----------------

• It creates a retro atmosphere as a decoration for the room, but it is very convenient because it does not require wiring and can be carried anywhere. It is perfect for night camping or BBQ. It is recommended to choose a small light that is not too bright to create a relaxing space.
• [Lighting fixtures can be installed anywhere!] Fix with a wall hook. No anchor is required. Simply hammer the three pins of the hook into the wall, so installation and removal are easy. It is also convenient that the angle can be changed as desired. You can install it anywhere.
• Package contents: 1 x lamp body, 1 x dedicated LED bulb, 1 x charger, 1 x wall hook 

-------------------------------

[Lighting fixtures can be installed anywhere!] Fix them with wall hooks.

Details : No anchors are required. Simply hammer the three hook pins into the wall for easy installation and removal.

It can be used on walls such as plasterboard, plywood, brick, etc. The pin is only 1.5mm thick.

Another nice thing is that the hole left after removal is small and not very noticeable.

how to use:

Step 1: Charge the light fixture with the charger. (3 hours of charging can provide up to 24 hours of light)

Step 2: Hammer the wall hook into the wall where you want to mount it.

Step 3: Hang the light fixture on the hook.

Step 4: Install the included 3.7v led bulb and then turn it on.

Step 5: Select the mode and turn the lamp on/off.

----------------------------------

Product Specifications:

The lamp body has a built-in battery.

After 3 hours of charging, the light can be lit continuously for approximately 24 hours.

(Charger light indicates: green is full, red is charging)

Bulb Specifications:

Input voltage: DC5V (Note: Not compatible with ordinary 100V lighting fixtures!)

Light color: Incandescent

Power: LED 4W (equivalent to 40W)